产品介绍
HDMI信号放大延长器通过使用两股非屏蔽双绞线连接来拓展高1080P的高清视频 高达60米的距离 不仅突破了HDMI线材的限制 同时采用的Cat5/6的网线在线材结构上更加具有便利性和适应性 同时成本也更加低廉 是您拓展HDMI信号的不二选择。

产品特点
支持视频输入:24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
信号传输:一根cat5e或者cat6线（推荐使用）替代HDMI线，接受器和发射器之间线缆最长可达60米
支持视频输出:24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
支持音频格式:DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
LED显示灯:当电源或者延长器工作时，相关的LED灯会变亮
使用AWG26规格的线缆,信号传输可达60米
安装简单

配送附件清单:
1、主机TX+主机RX

2、5V电压电源适配器x2
3、说明书一份

连接与操作：
用一根HDMI线缆将信号源与延长器的发射端连接起来
用一根HDMI线缆将信号端与延长器的接收端连接起来
用一根cat5e线或者cat6线（推荐使用）来代替HDMI线将延长器的发射端和接收端连接起来，最长可传输60米
插入电源到发射器和接收器

英文参考：

【product description】
The HDMI signal amplifier and extender uses two unshielded twisted pair connections to expand the high 1080P high-definition video up to a distance of up to 60 meters. Not only does it break through the limitation of the HDMI cable, but the Cat5/6 network cable is more convenient in the structure of the cable. With adaptability and lower cost, it is your best choice to expand HDMI signal.
【Features】
Support video input: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Signal transmission: a cat5e or cat6 cable (recommended) instead of the HDMI cable, the cable between the receiver and the transmitter can be up to 60 meters long
Support video output: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format: DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
LED indicator light: When the power supply or extender is working, the related LED light will turn on
Using AWG26 specification cable, the signal transmission can reach 60 meters
easy installation
Delivery accessories list:
1. Host TX+Host RX

2. 5V voltage power adapter x2
3. A copy of the manual
Connection and operation:
Use an HDMI cable to connect the signal source to the transmitter of the extender
Use an HDMI cable to connect the signal end to the receiving end of the extender
Use a cat5e cable or cat6 cable (recommended) to replace the HDMI cable to connect the transmitter and receiver of the extender, and the maximum transmission length is 60 meters
Plug in the power supply to the transmitter and receiver