本店单个产品价格不包含电池与充电器,如有需要请联系客服
产品参数:
■发 光 源: COB(色温6500K) ■最高亮度: 白光(补光)高亮,红光400流明,蓝光12瓦
■出光角度:120度摄影补光 ■工作电压:3.0V-4.2V
■灯体尺寸: 头部直径65毫米,灯身直径50.3毫米,长度119毫米
■镜片规格: 6毫米(进口PC材质)■充电口 :type-c
■电池型号:21700 *3【锂电池】 ■重量:600克(净重) ■防水深度:100米
Product parameters:
■ Luminous source: COB(color temperature 6500K) ■ Maximum brightness: white light (fill light) bright, red light 400 lumens, blue light 12 watts
■ Light Angle: 120 degrees photography light ■ Working voltage: 3.0V-4.2V
■ Light body size: head diameter 65 mm, body diameter 50.3 mm, length 119 mm
■ Lens specification: 6mm (imported PC material) ■ Charging port: type-c
■ Battery model: 21700 *3 [lithium battery] ■ Weight: 600 grams (net weight) ■ Waterproof depth: 100 meters
Warm reminder
Precautions for use
I. Switch instructions
1, the battery for the positive electrode to the inside (lamp side), the negative electrode to the outside (tail)2, the switch in the tail, the switch function is the switch function, tap the switch is dimming function.
Two. Circuit board instructions
1, the store adopts advanced voltage constant current technology, can effectively solve the LED flashlight on the voltage constant current requirements.
2, special tips :A. do not overvoltage use, the voltage does not exceed 4.2VB. The battery is facing the front, do not reverse, otherwise it will burn board C. Pay attention to control the change of electrical temperature to ensure heat dissipation D. Non-professionals do not open the circuit board
3, warranty description: Open or handle the circuit board is no longer covered by warranty.
Iii. Lithium battery instructions
1, lithium battery characteristics: lithium battery and mobile phone battery charging method is completely different; Lithium battery has no memory, can be charged at any time, do not overcharge.
2, the first charge of at least 6 hours, after the green light according to the charger can be, there is no overcharge.
3, special tips to use anti-overcharge, anti-reverse connection, anti-short circuit "three" charger;
4, do not use the battery for a long time, should be fully stored, normally in about three months and then charge and discharge once.
Four, the use of the flashlight instructions
1, in use, according to the requirements of the voltage and battery, do not misuse, to prevent burning the circuit board, different models, different voltages of the battery do not use at the same time.
2. In use, when the brightness of the flashlight changes significantly, the flashlight should be turned off to prevent overdischarge of the battery.
3, heat dissipation skills: in the use of electricity, to ensure heat dissipation. It is strongly required that when the battery is fully charged, it is best to use the second gear first, so that the electric lamp holder and the battery can be extended product life! Can not direct electric light into people's eyes super bright, so as not to affect vision, especially children.
Five, troubleshooting
1, check the battery: ensure that the battery has power and install the battery in the correct direction, do not use different brands of batteries, old and new batteries can not be mixed.
2. Check the tail cap: ensure that the switch is tightened and in good contact, ensure that the copper column of the tail cap is in good contact with the metal sheet of the tail cap pressure ring, and pay attention to whether the lamp cap is loose