喷花高度：1-7米（控台10档，遥控3档）
喷花口径：26mm
喷花方向：上
加热方式：电磁加热 预热3分钟左右
控制方式：DMX512和无线遥控
功率：900W
外壳材质：铝
配件：3M电源线、信号线，多功能遥控器
产品尺寸：220*250*310mm

纸箱单只装：305*305*340mm 实重9kg
纸箱两只装：640*320*360mm 实重19kg
航空箱2只装：700*310*450mm 实重31kg
航空箱4只装：700*690*500mm 实重51kg

特点：

1. DMX控台10个档位可调，遥控3个档位可调
2. 送粉电机、鼓风机转动电机功率更大
3. 喷花口26mm，喷花粗、厚实好看

产品稳定 ， 质感高端 ， 配置齐全

一 、 外观美观高端

1）外壳采用铝材，黑色氧化工艺，白色烤漆工艺，质感高端；标识采用激光打标不掉色，可提供激光打印logo或其他丝印；6面独立设计精度高，售后便捷。

2）所有螺丝插头均内沉头设计，美观不割手；提手采用折叠不锈钢提手方便美观

二 、 加热安全 ， 速度快

1）全系列产品全部采用电磁加热，更快速，更安全，内部加热系统材质均采用耐高温的316型号2）定制独立加热控制板，内置安全温控程序，安全耐用

三 、 传动稳定耐用

1）传动电机采用扭矩大的交流电机，稳定可靠，无须维护；有效降低卡料卡死状态

2）进料和传料采用双电机分离，提高使用寿命，具备自动清料功能

四 、 遥控距离远 ， 内置带特效

1）遥控私模，电池采用7号通用电池便于购买，采用2.4G无线频率，机器外置信号放大接收器，控制距离远，使用便捷

2）内置自带多种特效跑马功能；单个可以实现最多15台同时特效效果

五 、 安全防护

1）加热板内置温控保护程序，防止过度加热

2）内置防倾斜安全功能，有效较低机器意外推到造成伤害

3）内置鼓风机安全防护程序，防止加热粉末掉落机器内部引发火灾风险

六 、 使用方便 ， 售后便捷

1）遥控和控台均配自动清料功能，无须每次把料盒内料用完，倒出粉末，使用方便

2）外壳右侧设计防卡料维修孔，侧面设置可外部拆卸防尘网，底部有可拆卸的漏灰尘设计，不拆机解决卡料

Voltage: 110V/220V
Power: 900W
Control way: DMX512/Remote

Jet Distance: 1-7m 
DMX Channels: 2 ( 1 channel =start. 2 channel=jet)
Machine cover materials= aluminum
Waterproof rating: IP20
Remote control distance: 40-50m
Remote controller type: 2.4G
Remote controller support machine quantity: 15 units
Machine working temperature: 560℃-580℃
Heating function: support to turn off heating when machine turn on.
Packing way: carton box with foam (2in1/4in1 flight case is optional)

Product feature:
1: the machine outside cover is aluminum and strong enough for shipping to overseas country.

2: the remote controller support to adjust machine jet height and build in program. Customer can make the setting to machine and use remote controller to make machine jet with different direction. No need additional controller. Customer need to set the machine DMX address to 001/003/005/007 such way and press remote controller Number button(the lcd display will shows machine quantity change). The remote controller maximum support 15 units. Then press the effect button and machine will jet with program effect. (please note the remote controller no remember function and need to make the setting again next time)

3: the DMX controller channels 1 (0-220= heat off. 221-239= clean powder function. 240-255=heating function). Channels 2 (0-255 control jet distance). When you no need to machine heating on. Then press the channels 1 under 220 and it will turn off heating. No need to keep machine heater working side always. If you want to use remote controller to shut of heating. Press heat off more than 3 seconds and machine heating will shut off.

4: Remote controller is 2.4G and control distance can be 50m. the machine receiver is built outside the cover and receive effect is good and fast response.

5: the machine has 2 electrical motor to transfer and propel powder. You can use DMX controller or Remote controller to choose clean function. To make sure inside no powder keep inside the powder pipe. (please use clean function each time after use otherwise the powder becomes cool easy to block the pipe)

6: Due to express company requirement we need to remove the battery from remote controller. Customer need to purchase from the local shop again after receive the machine.

7: the heater pipe is electromagnetic heating and heating speed is fast and safe.

Packing list for each unit:
1 x cold fireworks machine
1 x power cable
1 x DMX cable
1 x remote controller (no battery inside)
1 x manual book

*请注意老款750瓦的型号已经停止生产，目前是新款900瓦。

*新款900瓦的机箱和老款750瓦的机型尺寸一样，喷射高度不同，900瓦略高一些，价格不变。

1688系统不允许上传喷射效果图

如果需要效果喷射的图片和视频

请额外联系我司销售。