使用说明
特点
1.秒表功能
2.分段显示功能
3.时、分、秒、月、日、星期显示功能
4.闹时和整点报时功能
5.工作温度范围-5~+50℃
使用方法：
按动方式键M转换状态
日期显示：正常走时状态，按S键，显示月、日
闹时显示：正常走时状态，按R键，显示响闹时间
响闹控制：正常走时状态，按住R键，显示响闹时间，此时
按一下S键，右角出现 ，响闹。
再按一下S键， 消失，取消响闹。
整点报时控制：正常走时状态时，按住R键，显示响闹时间，此时
若按M键，星期标设显现，或消失，即可控制整点是否报时。
秒表工作状态
1.单次时间间隔测定：按S键启动，再按S键停止，按R键清0，
当被测试时间间隔<29’ 59.99”时，小显示单位为1/100秒
当被测试时间间隔>29’ 59.99”时，小显示单位为秒
长可测间隔时间为23 H59 M59S。
2.分段计时，按S键开始，再按R键停止，显示间隔时间；
再按R键，这时显示出的时间表示，从开始到第二次按R键时的
时间间隔，......如上下去，可测多段时间
复位的方法，在按R键后，再按一下S键，再按一下R键即可复位。
走时和闹时调整
1.闹时调整
按M键至显示闹时状态，
按R键选择时或分闪动，然后按S键调整好响闹时间。
2.走时调整
按M键至显示走时状态，
按R键分别选择时、分、秒、日、月、星期闪动，按S键分
别予以调整。
注意事项：
☆本表没有防水设计，请不要放在水中使用。
1. TIMING
In normal status , press M button to access the timing mode . If the display of the time does not show zero, then press S button to stop timing. Press R button to reset the display back to zero.
1.Start timing
Press S button to start timing .Press S button again to stop timing (Press S button repeatedly to start stop timing)
Press R button to reset the display back to zero
2.Split mode
Press S button to start timing . Press R button to display the first period time; press R button again to stop the time .Then press R button to display the second period time. Press S button to reset the display back to zero.
3.Lap mode
Press S button to start timing .Press R button to display the first period time; press S button to stop the time .Press R button again to display the second period time .Press R button again to reset the display back to zero
II.TIME,CALENDAR AND ALARM DISPLAY
In normal status , press S button to display month, day and week .Press R button to display alarm.
III.TIME AND CALLENDAR SET UP
In normal status , press M button 3 times to access the time set up mode .Second, weed and time will flicker at the same time .Press R button to adjust minute , hour, day, month , week and second settings(A/P is 12 hour format, A is A.M, P is P.M ,H is 24 hour format ).Press S button to change the numbers (hold the S button and the numbers will go faster ).After adjusting .press M button to return to normal status .(p.s. Second can only be adjusted 00)
IV. ALARM SETTING
In normal status, press M button twice to go to the alarm mode . Hour and week will flicker at the same time . Press R button to choose minute and hour settings. Press S button and adjust the time .After adjusting. Press M button to return to normal status.
In normal status, hold the R button and
Press S button repeatedly, the alarm sign will display /disappear that means alarm is on /off.
Press M button repeatedly , the week will display /disappear that means alarm is on /off.
V. WARNING
Avoid humidity
1. Do not expose the sport stop watch in direct sun light for extended period of time
2. Avoid corrosive materials.
3. Do not use it under too much or too low humidity environment.
使用说明
特点
1.秒表功能
2.分段显示功能
3.时、分、秒、月、日、星期显示功能
4.闹时和整点报时功能
5.工作温度范围-5~+50℃
使用方法：
按动方式键M转换状态
日期显示：正常走时状态，按S键，显示月、日
闹时显示：正常走时状态，按R键，显示响闹时间
响闹控制：正常走时状态，按住R键，显示响闹时间，此时
按一下S键，右角出现 ，响闹。
再按一下S键， 消失，取消响闹。
整点报时控制：正常走时状态时，按住R键，显示响闹时间，此时
若按M键，星期标设显现，或消失，即可控制整点是否报时。
秒表工作状态
1.单次时间间隔测定：按S键启动，再按S键停止，按R键清0，
当被测试时间间隔<29’ 59.99”时，小显示单位为1/100秒
当被测试时间间隔>29’ 59.99”时，小显示单位为秒
长可测间隔时间为23 H59 M59S。
2.分段计时，按S键开始，再按R键停止，显示间隔时间；
再按R键，这时显示出的时间表示，从开始到第二次按R键时的
时间间隔，......如上下去，可测多段时间
复位的方法，在按R键后，再按一下S键，再按一下R键即可复位。
走时和闹时调整
1.闹时调整
按M键至显示闹时状态，
按R键选择时或分闪动，然后按S键调整好响闹时间。
2.走时调整
按M键至显示走时状态，
按R键分别选择时、分、秒、日、月、星期闪动，按S键分
别予以调整。
注意事项：
☆本表没有防水设计，请不要放在水中使用。
1. TIMING
In normal status , press M button to access the timing mode . If the display of the time does not show zero, then press S button to stop timing. Press R button to reset the display back to zero.
1.Start timing
Press S button to start timing .Press S button again to stop timing (Press S button repeatedly to start stop timing)
Press R button to reset the display back to zero
2.Split mode
Press S button to start timing . Press R button to display the first period time; press R button again to stop the time .Then press R button to display the second period time. Press S button to reset the display back to zero.
3.Lap mode
Press S button to start timing .Press R button to display the first period time; press S button to stop the time .Press R button again to display the second period time .Press R button again to reset the display back to zero
II.TIME,CALENDAR AND ALARM DISPLAY
In normal status , press S button to display month, day and week .Press R button to display alarm.
III.TIME AND CALLENDAR SET UP
In normal status , press M button 3 times to access the time set up mode .Second, weed and time will flicker at the same time .Press R button to adjust minute , hour, day, month , week and second settings(A/P is 12 hour format, A is A.M, P is P.M ,H is 24 hour format ).Press S button to change the numbers (hold the S button and the numbers will go faster ).After adjusting .press M button to return to normal status .(p.s. Second can only be adjusted 00)
IV. ALARM SETTING
In normal status, press M button twice to go to the alarm mode . Hour and week will flicker at the same time . Press R button to choose minute and hour settings. Press S button and adjust the time .After adjusting. Press M button to return to normal status.
In normal status, hold the R button and
Press S button repeatedly, the alarm sign will display /disappear that means alarm is on /off.
Press M button repeatedly , the week will display /disappear that means alarm is on /off.
V. WARNING
Avoid humidity
1. Do not expose the sport stop watch in direct sun light for extended period of time
2. Avoid corrosive materials.
3. Do not use it under too much or too low humidity environment.
使用说明
特点
1.秒表功能
2.分段显示功能
3.时、分、秒、月、日、星期显示功能
4.闹时和整点报时功能
5.工作温度范围-5~+50℃
使用方法：
按动方式键M转换状态
日期显示：正常走时状态，按S键，显示月、日
闹时显示：正常走时状态，按R键，显示响闹时间
响闹控制：正常走时状态，按住R键，显示响闹时间，此时
按一下S键，右角出现 ，响闹。
再按一下S键， 消失，取消响闹。
整点报时控制：正常走时状态时，按住R键，显示响闹时间，此时
若按M键，星期标设显现，或消失，即可控制整点是否报时。
秒表工作状态
1.单次时间间隔测定：按S键启动，再按S键停止，按R键清0，
当被测试时间间隔<29’ 59.99”时，小显示单位为1/100秒
当被测试时间间隔>29’ 59.99”时，小显示单位为秒
长可测间隔时间为23 H59 M59S。
2.分段计时，按S键开始，再按R键停止，显示间隔时间；
再按R键，这时显示出的时间表示，从开始到第二次按R键时的
时间间隔，......如上下去，可测多段时间
复位的方法，在按R键后，再按一下S键，再按一下R键即可复位。
走时和闹时调整
1.闹时调整
按M键至显示闹时状态，
按R键选择时或分闪动，然后按S键调整好响闹时间。
2.走时调整
按M键至显示走时状态，
按R键分别选择时、分、秒、日、月、星期闪动，按S键分
别予以调整。
注意事项：
☆本表没有防水设计，请不要放在水中使用。
1. TIMING
In normal status , press M button to access the timing mode . If the display of the time does not show zero, then press S button to stop timing. Press R button to reset the display back to zero.
1.Start timing
Press S button to start timing .Press S button again to stop timing (Press S button repeatedly to start stop timing)
Press R button to reset the display back to zero
2.Split mode
Press S button to start timing . Press R button to display the first period time; press R button again to stop the time .Then press R button to display the second period time. Press S button to reset the display back to zero.
3.Lap mode
Press S button to start timing .Press R button to display the first period time; press S button to stop the time .Press R button again to display the second period time .Press R button again to reset the display back to zero
II.TIME,CALENDAR AND ALARM DISPLAY
In normal status , press S button to display month, day and week .Press R button to display alarm.
III.TIME AND CALLENDAR SET UP
In normal status , press M button 3 times to access the time set up mode .Second, weed and time will flicker at the same time .Press R button to adjust minute , hour, day, month , week and second settings(A/P is 12 hour format, A is A.M, P is P.M ,H is 24 hour format ).Press S button to change the numbers (hold the S button and the numbers will go faster ).After adjusting .press M button to return to normal status .(p.s. Second can only be adjusted 00)
IV. ALARM SETTING
In normal status, press M button twice to go to the alarm mode . Hour and week will flicker at the same time . Press R button to choose minute and hour settings. Press S button and adjust the time .After adjusting. Press M button to return to normal status.
In normal status, hold the R button and
Press S button repeatedly, the alarm sign will display /disappear that means alarm is on /off.
Press M button repeatedly , the week will display /disappear that means alarm is on /off.
V. WARNING
Avoid humidity
1. Do not expose the sport stop watch in direct sun light for extended period of time
2. Avoid corrosive materials.
3. Do not use it under too much or too low humidity environment.
温馨提醒：产品图片及价格仅供参考，欢迎在线咨询！
产品展示
