1、可以测量三极管、二极管、 电阻、 电容、 电感、晶闸管、场效应管，稳压管，双二极管，发光二极管等
2、可以测量电压
3、内置锂电池，续航时间长
说明：
@充电请使用外接5V电源或手机USB电源
@指示灯为红色表示正在充电，指示灯为绿色表示充电完成
温馨提示：充电输入电压为6V，请勿超压使用，否则将损坏测试仪并有电池爆炸的可能
4、红外解码功能
将红外遥控器对准测试仪的"IR"测试孔，按下遥控器按键
如果测试仪解码成功，则显示用户码和数据码，并显示对应的红外波形。
如果解码失败或无法解码，则不显示用户码和数据码，此时如果在测试仪界面则不能进入红外解码界面，如果在红外解码界面则仍然显示上次成功的解码信息
右上角圆点用来指示是否接收到遥控器的红外数据，红色表示正在接收红外数据，蓝色表示解码成功
5、自动校准
短接三个测试座，短按多功能按键，测试仪自动进行校准。
校准过程中根据提示断开短接线后，无需进行其它操作。
Description:
3.5inch Colorful Display Multi-functional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET
Features:
It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
It can also be used to detect infrared wave forms.
It also can detect zener diode and has the function of self-calibration.
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too.
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
Not like the usual black and white display, this detector will show results in color.
Specifications:
Display: 3.5inch TFT Screen
Diode Range: < 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT < 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Power Mode: Rechargeable Lithium Battery ( INCLUDED)
Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in
Item Weight: 111.5g / 3.94oz
Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in
Package Weight: 114g / 4.02oz
