GENERAL DESCRIPTION
The ft2850 is a 5W Dual-Pump"M Class-AB/D/G audio
power amplifier with automatic level control (ALC) for
portable audio applications. It integrates Class-AB and
Class-D audio power amplifiers with a Class-G charge
pump regulator based upon proprietary Dual-PumpTM
topology. It operates from 3.2V to 4.6V supply. With a
supply voltage at 3.7V, it can deliver an output power of
5W with 10% THD+N, or an ALC output power of 4W
with 0.6% THD+N, into a 4Q speaker load.
In ft2850, the power supply rail of the audio amplifier's
output stage is adaptively boosted and regulated by a
Class-G charge pump regulator, allowing much higher
audio loudness than a stand-alone one directly
connected to the battery. The adaptive nature of the
Class-G charge pump regulator, whose output voltage
varies dynamically in response to the level of the audio
output, improves overall power efficiency and extends
battery life when playing music. The higher output
power and greater power efficiency resulted from the
Class-G charge pump regulator make ft2850 an ideal
audio solution for battery-powered electronic devices.
To facilitate various applications, the ft2850 provides
three types of audio amplifier outputs, i.e., Class-AB,
Class-D, and Class-G. For typical applications, the
Class-D/G audio output is preferred for its high
efficiency. The Class-AB audio output can be chosen to
alleviate design complexities for applications where
minimum FM radio interference is required.
The ft2850 features ALC that constantly monitors and
safeguards the audio output against the boosted supply
voltage, preventing output clipping distortion, excessive
power dissipation, or speaker over-load. Once an
over-level condition is detected, the ALC lowers the
voltage gain of the audio amplifier proportionally to limit
Ithe peak audio output voltage.

FEATURES

Proprietary Dual-Pump"M topology

●Selectable types of audio outputs:Class-AB/D/G

Filterless Class-D audio amplifier integrated with a Class-G charge pump regulator Automatic level control to eliminate output clipping Selectable ALC dynamic characteristics Maximum output power (Non-ALC Mode) 5.4W (VoD=3.7V. THD+N=10%,RL=3Ω+33μH) 5.0W (VoD=3.7V. THD+N=10%,RL=4Q+33μH) 3.1W (VoD=3.7V, THD+N=10%,RL=8Ω+33μH) ALC output power (ALC Mode) 4.6W (VoD=3.7V. THD+N=0.6%, RL=3Q+33μH) 4.0W (VoD=3.7V, THD+N=0.6%, RL=4Q+33μH) 2.4W (VoD=3.7V, THD+N=0.6%, RL=8Q+33μH) Maximum Voltage Gain: 28dB ALC dynamic range:9dB Low quiescent current: 4.5mA @ Voo=3.7V p Low THD+N:0.04% (Voo=3.7V, f=1kHz, RL=4Q+33μH, Po=0.5W) High PSRR:68dB at 1kHz Selectable fade-in time Auto-recovering over-current and thermal-overload protection Available in TSSOP-20L package APPLICATIONS Blue Tooth Speakers Smart Phones Portable Consumer Electronic Devices

  type-c扩展坞方案芯片                  HDMI高清音视频转换ic

USB 2.0/USB 3.0 HUB控制器        USB 读卡器IC

USB2.0 / SPI接口 以大网控制器     以太网PHY芯片

USB音频声卡IC   HDMI USB/PCIE 切换器

---产品方案周边配套:

HDMI转VGA转换器芯片方案，DP转LVDS转接板显示方案，DP转VGA转接线，DP转HDMI高清音视频转接方案。

视频桥接SATA转换IC，MIPI、LVDSTTL、时钟、DC升降压、收音、充电、功放芯片等

做生意细水长流，看长远，近诚信。结志同道合的伙伴，共赢未来财富之路。